FreeSA

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)

Build Date: ¥| 12¤ë 29 20:36:58 CST 2005 (root@localhost.localdomain)

Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena

Initializing Devices.

et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0

rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)

CPU type 0x29006: 264MHz

Total memory: 67108864 KBytes

Total memory used by CFE:  0x80800000 - 0x8089BA00 (637440)

Initialized Data:          0x80831B70 - 0x80834250 (9952)

BSS Area:                  0x80834250 - 0x80835A00 (6064)

Local Heap:                0x80835A00 - 0x80899A00 (409600)

Stack Area:                0x80899A00 - 0x8089BA00 (8192)

Text (code) segment:       0x80800000 - 0x80831B70 (203632)

Boot area (physical):      0x0089C000 - 0x008DC000

Relocation Factor:         I:00000000 - D:00000000

Device eth0:  hwaddr 00-17-31-2A-90-30, ipaddr 192.168.236.150, mask 255.255.255.0

        gateway not set, nameserver not set

Null Rescue Flag.

Null Restore Flag.

set pivot_wait = 0

Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)

Loading: .. 3740 bytes read

Entry at 0x80001000

Closing network.

Starting program at 0x80001000

Linux version 2.6.23 (random@digad) (gcc version 4.1.2) #1 Tue Jan 19 22:32:09 CST 2010

CPU revision is: 00029006

ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x03, vendor 0x4243)

ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x06, vendor 0x4243)

ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x06, vendor 0x4243)

ssb: Core 3 found: USB 1.1 Hostdev (cc 0x808, rev 0x02, vendor 0x4243)

ssb: Core 4 found: PCI (cc 0x804, rev 0x08, vendor 0x4243)

ssb: Core 5 found: MIPS 3302 (cc 0x816, rev 0x00, vendor 0x4243)

ssb: Core 6 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)

ssb: Core 7 found: IPSEC (cc 0x80B, rev 0x00, vendor 0x4243)

ssb: Core 8 found: MEMC SDRAM (cc 0x80F, rev 0x00, vendor 0x4243)

ssb: Initializing MIPS core...

ssb: set_irq: core 0x0806, irq 2 => 2

ssb: set_irq: core 0x0806, irq 3 => 3

ssb: set_irq: core 0x0804, irq 0 => 4

ssb: Sonics Silicon Backplane found at address 0x18000000

Determined physical RAM map:

 memory: 04000000 @ 00000000 (usable)

Initrd not found or empty - disabling initrd

Built 1 zonelists in Zone order.  Total pages: 16256

Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200

Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.

Primary data cache 16kB, 2-way, linesize 16 bytes.

Synthesized TLB refill handler (21 instructions).

Synthesized TLB load handler fastpath (33 instructions).

Synthesized TLB store handler fastpath (33 instructions).

Synthesized TLB modify handler fastpath (32 instructions).

PID hash table entries: 256 (order: 8, 1024 bytes)

Using 132.000 MHz high precision timer.

console [ttyS0] enabled

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 62348k/65536k available (1987k kernel code, 3124k reserved, 292k data, 120k init, 0k highmem)

Mount-cache hash table entries: 512

NET: Registered protocol family 16

ssb: PCIcore in host mode found

registering PCI controller with io_map_base unset

PCI: fixing up bridge

PCI: Fixing up device 0000:00:00.0

PCI: Device 0000:00:01.0 not available because of resource collisions

b43-pci-bridge: probe of 0000:00:01.0 failed with error -22

Time: MIPS clocksource has been installed.

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

squashfs: version 3.0 (2006/03/15) Phillip Lougher

Registering mini_fo version $Id$

JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

io scheduler noop registered

io scheduler deadline registered (default)

Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled

serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A

serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A

b44.c:v1.01 (Jun 16, 2006)

eth0: Broadcom 10/100BaseT Ethernet 00:17:31:2a:90:30

eth1: Broadcom 10/100BaseT Ethernet 40:10:18:00:00:2c

flash init: 0x1c000000 0x02000000

Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank

 Amd/Fujitsu Extended Query Table at 0x0040

Physically mapped flash: CFI does not contain boot bank location. Assuming top.

number of CFI chips: 1

cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.

Flash device: 0x200000 at 0x1fc00000

bootloader size: 262144

Creating 4 MTD partitions on "Physically mapped flash":

0x00000000-0x00040000 : "cfe"

0x00040000-0x001f0000 : "linux"

0x000f5000-0x001f0000 : "rootfs"

mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only

mtd: partition "rootfs" set to be root filesystem

mtd: partition "rootfs_data" created automatically, ofs=1D0000, len=20000 

0x001d0000-0x001f0000 : "rootfs_data"

0x001f0000-0x00200000 : "nvram"

nf_conntrack version 0.5.0 (1024 buckets, 4096 max)

ip_tables: (C) 2000-2006 Netfilter Core Team

TCP vegas registered

NET: Registered protocol family 1

NET: Registered protocol family 17

802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>

All bugs added by David S. Miller <davem@redhat.com>

VFS: Mounted root (squashfs filesystem) readonly.

Freeing unused kernel memory: 120k freed

Warning: unable to open an initial console.

Algorithmics/MIPS FPU Emulator v1.5

- preinit -

diag: Detected 'ASUS WL-700gE'

diag: Spinning up HDD and enabling leds

b44: eth0: Link is up at 100 Mbps, full duplex.

b44: eth0: Flow control is off for TX and off for RX.

Probing device eth0: found!

jffs2 not ready yet; using ramdisk

mini_fo: using base directory: /

mini_fo: using storage directory: /tmp/root

- init -

Please press Enter to activate this console. b44: eth0: Link is up at 100 Mbps, full duplex.

b44: eth0: Flow control is off for TX and off for RX.

BusyBox v1.7.2 (2010-01-19 22:22:19 CST) built-in shell (ash)

Enter 'help' for a list of built-in commands.

  _______                     ________        __

 |       |.-----.-----.-----.|  |  |  |.----.|  |_

 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|

 |_______||   __|_____|__|__||________||__|  |____|

          |__| W I R E L E S S   F R E E D O M

 KAMIKAZE (bleeding edge, r0) -------------------

  * 10 oz Vodka       Shake well with ice and strain

  * 10 oz Triple sec  mixture into 10 shot glasses.

  * 10 oz lime juice  Salute!

 ---------------------------------------------------

root@OpenWrt:/$ There is already a switch registered on the device 'eth0'

device eth0 entered promiscuous mode

jffs2: Too few erase blocks (2)

root@OpenWrt:/$